Concrete Kerb

JDP branches offer a wide range of concrete kerbs as specified in the current version of BS EN 1340. Due to JDP's close partnerships with the industry's leading manufacturers we can ensure customers are provided with leading branch quality products from their local branch.

Features & Benefits

All straight units and the majority of radius units are hydraulically pressed. Other radius units are hammer-compacted.

• Complies with British Standards
• Designed to withstand occasional vehicular impact

Kerbs / Application Selector

	Access Kerb	HGV Kerb	BS Kerb
Trafficking	Designed to withstand occasional bus impact	Designed to withstand occasional HGV impact while directing vehicle wheels back on to roadway	Designed to withstand occasional bus impact
Features	Wide range of profiles to suit access requirements Integral marker bump	High strength for busy routes Damage resistant Will accept signage	Meets British Standards
Accessories	Dropper units Quadrants to certain profiles	Radius units Dropper units Quadrants	Crossing units Dropper units Radius kerbs Internal and external angles Quadrants Offlets Marginal strips Marker channels Non standard options
Colours	Grey	Grey	Grey
Textures	Standard Natural granite	Standard	Standard

Half battered kerbs are designed with safety in mind to deflect vehicles travelling at low speeds back into the main carriageway and away from pedestrians using footways.

Applications

• Commercial sites
• Industrial sites
• City roads
• Urban areas

Half Battered BS Kerbs

Standard Kerbs

Code	Description
180100866	150x305 HB1
180100860	125x255 HB2
180100855	125x150 HB3

Droppers and Crossing Kerbs

Code	Description
180101704	125x255mm HB - 125x150mm BN (LH) DL1
180101705	125x255mm HB - 125x150mm BN (RH) DR1
180100658	125x150mm BN As Crossing Kerb

Radius Droppers (Available in 4, 5, 6,8 and 10m External Radius Only)

Code	Code	Description
LH	RH
180141369	180141368	125x255mm HB - 125x150mm BN 4m
180141371	180141370	125x255mm HB - 125x150mm BN 5m
180141373	180141372	125x255mm HB - 125x150mm BN 6m
180141375	180141374	125x255mm HB - 125x150mm BN 8m
180141377	180141376	125x255mm HB - 125x150mm BN 10m

Radius Kerbs & Channels

125x255 HB External	125x255 HB Internal	125x150 BN Channel External	125x150 BN Channel Internal	Size of Radius	Units per 1/4 circle
180141318	-	-	-	0.5	1
180140755	180141319	180141321	-	1	2
180140849	180141320	180141178	-	2	4
180140850	180141042	180141179	180141202	3	6
180140851	180141043	180141180	180141203	4	8
180140852	180141044	180141181	180141204	5	10
180140853	180141045	180141182	180141205	6	12
180140854	180141046	180141183	180141206	8	16
180140855	180141047	180141184	180141207	10	20
180140856	180141048	180141185	180141208	15	30

The table shown is an approximate guide only.

All radii over 15 m (40 ft) can be achieved by using standard 914 mm (3 ft) or 609 mm (2 ft) kerbs.

Before ordering, check availability of size and profile.

Also when ordering, please state the dimensions first, then the profile, then the radii followed by Internal or External. e.g. 125x150 HB 6M Ext.

Quadrants

Code	Description
180100854	305x255mm QHB
180100853	455x255mm QHB

Transition Kerbs

Code	Description
180101099	125x255mm HB RH - 125x255mm SP LH TR
180100983	125x255mm HB LH - 125x255mm SP RH TL

Angles

Code	Description
180101177	125x255mm HB Ext Angle HBXA
180101218	125x255mm HB Int Angle HBIA

Bull nose kerbs are designed to sit just proud of the surface as a crossing kerb. For dropping kerbs see relevant Half Battered or Splayed BS Kerb section.

Applications

• Commercial sites
• City Roads
• Industrial sites
• Urban areas

Standard Kerbs

Code	Description
180100666	125x255mm BN
180100658	125x150mm BN

Droppers and Crossing Kerbs

Code	Description
180100738	125x255mm BN - 125x150mm BN (LH) Non BS
180100826	125x255mm SP - 125x150mm BN (RH) Non BS
180100658	125x150mm BN As Crossing Kerb

Quadrants

Code	Description
180100657	305x255mm QBN
180100649	455x255mm QBN

Transition Kerbs

Code	Description
180101099	125x255mm HB RH - 125x255mm SP LH TR
180100983	125x255mm HB LH - 125x255mm SP RH TL

Angles

Code	Description
180140090	125x255mm BN Ext Angle
180140089	125x255mm BN Int Angle

Splayed kerbs are designed with safety in mind to allow vehicles travelling at high speeds to mount the kerb and preventing them from deflecting back into other vehicles on the main carriageway.

Applications

• Highways
• Carriageways

Standard Kerbs

Code	Description
180100780	125x255mm SP

Droppers and Crossing Kerbs

Code	Description
180100879	125x255mm SP - 125x150mm BN (LH) DL2
180100952	125x255mm SP - 125x150mm BN (RH) DR2
180100658	125x150mm BN As Crossing Kerb

Radius Kerbs & Channels

125x255 SP External	125x150 BN Channel External	125x150 BN Channel Internal	Size of Radius	Units per 1/4 circle
-	-	-	0.5	1
180141399	180141321	-	1	2
180141194	180141178	-	2	4
180141195	180141179	180141202	3	6
180141196	180141180	180141203	4	8
180141197	180141181	180141204	5	10
180141198	180141182	180141205	6	12
180141199	180141183	180141206	8	16
180141200	180141184	180141207	10	20
180141201	180141185	180141208	15	30

Not available use HB.

The table shown is an approximate guide only.

All radii over 15m (40ft) can be achieved by using standard 914mm (3ft) or 609mm (2ft) kerbs.

Before ordering, check availability of size and profile.

Also when ordering, please state the dimensions first, then the profile, then the radii followed by Internal or External. e.g 125x150 HB 6m Ext

Quadrants

Code	Description
180100775	305x255mm QSP

Transition Kerbs

Code	Description
180101099	125x255mm SP Ext Angle SPXA
180100753	125x255mm SP Int Angle SPIA

Angles

Code	Description
180100593	125x255mm SP Ext Angle SPXA
180100753	125x255mm SP Int Angle SPIA

Channels - Square, Dished, Fluted & Motorway

Code	Description
180100925	150x100x914mm	Square
180100926	150x125x914mm (CS2)	Square
180100931	150x150x914mm	Square
180100928	255x125x914mm (CS1)	Square
180100932	305x150x914mm	Square
180100985	150x100x914mm	Dished
180101132	255x125x914mm (200x25)	Dished
180100990	305x150x914mm (230x25)	Dished
180101100	255x75x914mm	Fluted
180101083	455x150x914mm (18"x16")	Motorway

Edging kerbs are designed to retain the surface structure between the roadside kerb and the loose ground, such as pavements.

Applications

• City roads
• Urban areas
• Highways
• Carriageways
• Commercial sites
• Industrial sites

Code	Description
180100576	50x150x914 Edging Kerb Flat Top EF
180100589	50x205x914 Edging Kerb Flat Top EF
180100569	50x150x914 Bullnose Edging EBN
180101072	50x205x914 Bullnose Edging EBN
180101615	50x150x914 Round Top Edging RT
180103772	50x205x914 Round Top Edging RT
1801	75x255x914 Round Top Edging RT

British Standard kerb products comply with the performance levels in European Standard BS EN 1340.

These products should be installed in accordance to BS7533 Part 6. They form edge restraints for other paving materials, pedestrian/vehicle segregation and drainage collectors for surface water. Foundations for units can either be a well compacted bed of fresh concrete or a 1:3 cement : sand mortar (12-40mm thick) on a preformed concrete race.

The base concrete, to grade ST1, should be a minimum 150mm thick and extended 150mm beyond the edge of the unit where haunching is required.

Haunching for units as appropriate should be with a concrete grade ST1. It is necessary to ensure a good bond between haunching concrete, unit and base. Allow to gain sufficient strength before laying adjacent paving material. Lay units to line and level with a paviours maul such as that they are within 3mm of the design alignment. Joints should be close joints (trowel thickness) for natural stone and concrete units, laid dry.

Technical Support

Our expert technical support team are on hand to offer assistance and support for all our products.