Power
JDP supply power ducting to Energy Network Association Technical Specification (ENATS) 12- 24 Class 1, Class 2 and Class 3 as well as to BS EN50086-2-4 specification for conduit systems for cable management. Systems manufactured in solid wall uPVC, twinwall HDPE, and solid wall MDPE/HDPE cover the complete range of needs for contractors working for Distribution Network Operators (DNO) in all areas of the country.
Class 1 uPVC

Applications
- For Class 1 electric cable applications – guaranteeing 450kN compression performance at operating temperatures up to 75ºC
- Generally 33kV
- Where ENATS 12-24 specification is stipulated
- Specific markings and colours to suit a variety of DNOs, including Scottish Power & Electricity North West
ID/OD (mm) | 81.9/88.9 | 102/110 | 116/125 | 150/160 | 188/200 |
---|---|---|---|---|---|
Pipe 6m | 07055079T | 07053978S | 07055080T | 07054749 | 07055888 |
Couplers | 07055306 | - | 07055621 | 07053748 | - |
End Caps | - | - | - | - | - |
11.25° Bends | 07055492 | 07055854 | 07054736B | 07055858 | - |
22.5° Bends | 07055536 | 07055855 | 07055427 | 07055859 | 07055900 |
45° Bends | - | 07055856 | - | 07055860 | - |
90° Bends | - | 07055886 | - | 07055861 | - |
Standards
Produced to BS EN 50086-2-4 and conforms to ENATS 12-24 Revision 2 (February 2008).
Class 1 Large Diameter PE Duct

These solid wall Polyethylene ducts conform to EN50086-2-4 and ENATS. Their main advantage over other duct systems is their jointing method, either buttfusion or electrofusion, and that they are ideally suited for directional drilling under roadways.
Applications
- Open trench or trenchless installation
- Directional drilling or no dig (shallow depth)
- Moleploughing
- Where ENATS 12-24 Class 1 is stipulated
SDR11 | 90mm | 110mm | 125mm | 160mm | 180mm |
---|---|---|---|---|---|
6m | - | 07029896 | 07029897 | - | 07029909 |
12m | - | 07029896L | 07029897L | 07029951 | 07029909L |
50m | 07029676S | 07029667S | 07029678S | 07029679S | 07029681S |
100m | 07029676 | 07029667 | 07029678 | 07029679 | 07029681 |
For larger sizes see our Polyethylene Pressure Pipe Systems section. Specific colours and markings available subject to minimum order values.
Standards
Produced to BS EN 50086-2-4 and conforms to ENATS 12-24 Revision 2 (February 2008).
Class 2 Twinwall HDPE

These black external corrugated / smooth internal bore HDPE twinwall ducts are suitable for Class 2 applications where Energy Network Association Technical Specification (ENATS) 12-24 specification is stipulated.
Applications
- For Class 2 electric cable applications – guaranteeing 450kN compression performance at operating temperatures up to 50ºC
- Generally 11kV or below
- Where ENATS 12-24 Class 2 specification is stipulated
ID/OD (mm) | 94/110 | 100/118 | 125/148 | 150/178 |
---|---|---|---|---|
Pipe 6m | 0707RB94X6 | 0707RB100X6 | 0707RB125X6 | 0707RB150X6 |
Couplers | 0707CRB94 | 0707CRB100 | 0707CRB125 | 0707CRB150 |
Seals | 0707SRD94 | 0707SRD100 | - | - |
End Caps | 0707RBEC94 | 0707EC1059 | 0707EC3051 | 0707EC1778 |
11.25° Bends | 0707RBDB94X11X0.42 | 0707B1001125 | 0707RB125X11X2.4 | 0707RB150X11X2.4 |
22.5° Bends | 0707RBDB94X22X0.42 | 0707B1002250 | 0707RB125X22X2.4 | 0707RB150X22X2.4 |
45° Bends | 0707B9445X450 | 0707B10045X450 | 0707B12545X610 | 0707B15045X610 |
90° Bends | 0707B9490X450 | 0707B10090X450 | 0707B12590X610 | 0707B15090X610 |
Class 2 uPVC

These solid wall uPVC ducts are suitable for Class 2 applications where Energy Network Association Technical Specification (ENATS) 12-24 specification is stipulated.
Applications
- For Class 2 electric cable applications – guaranteeing 450kN compression performance at operating temperatures up to 50ºC
- Generally 11kV or below
- Where ENATS 12-24 specification is stipulated
ID/OD (mm) | 83.3/88.9 | 90.5/96.5 | 103.6/110 | 117.4/125 | 152/160 |
---|---|---|---|---|---|
Pipe 6m | 07025079 | 07023772S | 07024748S | 07025080 | 07024749 |
Class 2 Polyethylene

These black solid wall Polyethylene ducts are available in coils.
Applications
- For Class 2 electric cable applications - guaranteeing 450kN compression performance at operating temperatures up to 50ºC
- Where ENATS 12-24 Class 2 specification is stipulated
- Open trench or trenchless installation
ID/OD (mm) | 32/38 | 50/58 | 50/60 |
---|---|---|---|
50m | 0705PD/002X50E | 07055847 | 0705PD/004 |
Couplers | 0705C/PD002 | - | 0705C/PD004 |
Class 3 Twinwall HDPE

These black external corrugated / smooth internal bore HDPE twinwall ducts are suitable for all cable management systems where EN50086-2-4 specification or ENATS 12-24 Class 3 is required. They do not however meet the higher performance standards set by Class 1 or Class 2 ENATS 12-24 specification.
Applications
- For cable applications - 450kN compression performance at ambient operating temperatures (23ºC)
Coils
ID/OD (mm) | 32/40 | 40/50 | 50/63 | 75/90 | 94/110 | 137/160 |
---|---|---|---|---|---|---|
Pipe x 50m | 0707RC4050B | 0707RC5050B | 0707RC6350B | 0707RC9050B | 0707RC11050B | 0707RC16025B |
Couplers | 0707CRC40 | 0707CRC50 | 0707CRC63 | 0707CRC90 | 0707CRC110 | 0707CRC160 |
Seals | 0707RCS40 | 0707RCS50 | 0707RCS63 | 0707RCS90 | 0707RCS110 | 0707RCS160 |
End Caps | 0707RCE40 | 0707RCE50 | 0707RCE63 | 0707RCE90 | 0707RCE110 | 0707RCE160 |
Lengths
ID/OD (mm) | 94/110 | 100/120 | 125/145 | 137/160 | 150/178 |
---|---|---|---|---|---|
Pipe | 0707ENTW94X6BE | 0707ENTW100X6BE | 0707ENTW125X6BE | 0707ENTW137X6BE | 0707ENTW150X6BE |
Couplers | 0707CRC110 | 0707CRC120 | 0707CRC145 | 0707CRC160 | 0707CRC178 |
Seals | 0707RCS110 | 0707RCS120 | 0707RCS145 | 0707RCS160 | 0707RCS178 |
End Caps | 0707RCE110 | 0707RCE120 | 0707RCE145 | 0707RCE160 | 0707RCE178 |
11.25° Bends | 0707BDRB94X11 | 0707BDRB100X11 | 0707BDRB125X11 | 0707BDRB137X11 | 0707BDRB150X11 |
22.5° Bends | 0707BDRB94X22 | 0707BDRB100X22 | 0707BDRB125X22 | 0707BDRB137X22 | 0707BDRB150X22 |
45° Bends | 0707BDRB94X45 | 0707BDRB100X45 | 0707BDRB125X45 | 0707BDRB137X45 | 0707BDRB150X45 |
90° Bends | 0707BDRB94X90 | 0707BDRB100X90 | 0707BDRB125X90 | 0707BDRB137X90 | 0707BDRB150X90 |
Class 3 Polyethylene

These black solid wall Polyethylene ducts conform to BS EN50086-2-4 and ENATS 12-24 Class 3. They are available in coils.
Applications
- For Class 3 electric cable applications - 450kN compression performance at ambient operating temperatures
- Where ENATS 12-24 Class 3 specification is stipulated
- Open trench or trenchless installation
ID/OD (mm) | 32/37 | 38/44 |
---|---|---|
50m | 0705PD002X50E | 0705PD003X50E |
Couplers | 0705C/PD002 | 0705C/PD003 |
Split Duct
An ideal solution for ducting existing cables, or repairing damaged ducting, this product is available in short lengths as standard.
Code | Description |
---|---|
0707ENTWS94X1BE | 94/110mm Split Duct x 1m |
0707ENTWS100X1BE | 100/120mm Split Duct x 1m |
0707ENTWS125X1BE | 125/145mm Split Duct x 1m |
0707ENTWS150X1BE | 150/178mm Split Duct x 1m |
0707ENTWS94X3BE | 94/110mm Split Duct x 3m |
0707ENTWS100X3BE | 100/120mm Split Duct x 3m |
0707ENTWS125X3BE | 125/145mm Split Duct x 3m |
0707ENTWS150X3BE | 150/178mm Split Duct x 3m |