Self Tapping Swivel Tee (PVC or PE)
These Polypropylene mechanical Tapping Tees are designed for underground use, they strap securely around the mains pipe with the stainless steel bolts supplied. A self tapping cutter is housed underneath a protective cap.
Features and Benefits
- Stainless steel bolts & Polypropylene body ensure no corrosion
- 360 degree swivel head
- Suitable for MDPE and PVC mains pipe
- 25 and 32mm MDPE outlets available
- ¾” and 1” BSP male outlets available
Applications
- For drinking water use
- Can incorporate integral service isolation valve (with integral cutter)
- Provide means to connect a separate valve
- Provide for direct connection to service pipe from mains
| Code | Size (mm) |
|---|---|
| 09111654063X25 | 63 x 25 |
| 09111654063X32 | 63 x 32 |
| 09111654075X25 | 75 x 25 |
| 09111654075X32 | 75 x 32 |
| 09111654090X25 | 90 x 25 |
| 09111654090X32 | 90 x 32 |
| 091116540110X25 | 110 x 25 |
| 091116540110X32 | 110 x 32 |
| 091116540125X25 | 125 x 25 |
| 091116540125X32 | 125 x 32 |
| 091116540140X25 | 140 x 25 |
| 091116540140X32 | 140 x 32 |
| 091116540160X25 | 160 x 25 |
| 091116540160X32 | 160 x 32 |
| 091116540180X25 | 180 x 25 |
| 091116540180X32 | 180 x 32 |
Self Tapping Gunmetal Ferrule Straps
Designed for underground use, they strap securely around the mains pipe with the stainless steel bolts supplied. A self tapping cutter is housed underneath a protective cap.
Features and Benefits
- Suitable for contaminated ground
- Stainless steel bolts & gunmetal body ensure no corrosion
- 360 degree “banjo” swivel head
- 20, 25 or 32mm MDPE outlets available
- ½”, ¾”, 1” or 1½” BSP female outlets available
- MDPE and PVC mains pipe
| Code | Size (mm) | Code | Size (mm) |
|---|---|---|---|
| 08206325STFSM | 63 x 25 | 08206332STFSM | 63 x 32 |
| 08209025STFSM | 90 x 25 | 08209032STFSM | 90 x 32 |
| 082011025STFSM | 110 x 25 | 082011032STFSM | 110 x 32 |
| 082012525STFSM | 125 x 25 | 082012532STFSM | 125 x 32 |
| 082018025STFM | 180 x 25 | 082018032STFM | 180 x 32 |
Flanged Pipe Saddle
Pipe saddles suitable for Polyethylene and uPVC pipes from 110 to 315mm are available from JDP.
Features and Benefits
- Solid construction – epoxy powder coated ductile iron
- Stainless steel bolts, nuts and washers
- O ring sealed drill hole
- Bonded rubber lining on lower saddle ensure positive positioning
- Threaded outlet and shut-off versions available
Applications
- PE & uPVC pipes
- Cold water up to PN 16
| Pipe OD (mm) | Flange DN (mm) | ||
|---|---|---|---|
| 80 | 100 | 150 | |
| 110 | - | - | |
| 140 | - | ||
| 160 | - | ||
| 180 | - | ||
| 200 | - | ||
| 225 | - | ||
| 250 | - | - | |
| 280 | - | - | |
| 315 | - | - | |
Standards
BS EN 1982:1998 CC491K
This guide is an overview only, for full installation instructions please refer to manufacturer’s guidelines.
- Jointing surface of pipe must be dry and clean
- Saddles can be used with pressurised pipe
- Check pressure rating of saddle is compatible with operating pressures of pipe system
- Follow the manufacturer’s installation instructions